Deutsch (Deutschland)
Français (Belgique)
Nederlands (België)
.jpg)
AQUAGUARD
Uncompromising Pool Safety
Uncompromising Pool Safety
AQUAGUARD - AUTOMATIC SAFETY COVER
PRINCIPLE
The AquaGuard is composed of a reinforced PVC membrane, allowing for a near-hermetic seal of the pool. Operated by a key switch, the cover rolls up behind the pool in under a minute, making it quick and easy to open or close the pool. Available in both integrated and above-ground versions, the AquaGuard is suitable for both new and existing pools.
SAFETY
The AquaGuard is a genuine safety cover that complies with the French NF P 90-308 standard. It utilizes a hydraulic mechanism, eliminating the need for electricity near the pool. The cover's near-hermetic seal ensures the safety of children, animals, and even adults. Due to the water's buoyancy, the cover can support several hundred kilograms. Furthermore, the AquaGuard is self-locking, requiring no additional manual effort to secure it.
SYSTEM
The AquaGuard cover's mechanical principle is similar to that of a sailboat. The cover is guided in anodized aluminum tracks by KEVLAR-reinforced polyester ropes, with rope pulleys located at the track ends. To open the cover, the fabric is rolled up onto a tube positioned behind the pool. A hydraulic pump housed in the technical room powers the operation, eliminating the need for electricity near the pool. The cover is controlled by a key switch or a touchscreen with a pool view.
KEEPING THE POOL CLEAN
Beyond safety, the AquaGuard helps maintain a clean pool. Its near-hermetic seal keeps out leaves, pine needles, dust, and other debris. It also blocks UV rays, limiting algae growth and chlorine degradation. This results in crystal-clear pool water and minimizes the need for chemicals.
ENERGY SAVING
The AquaGuard cover helps maintain pool water temperature by minimizing energy loss from evaporation. Even when closed during the day, the pool continues to warm up, potentially gaining up to 3 degrees Celsius. This effect is more pronounced with darker fabric colors. The AquaGuard is also compatible with heat pumps.
HIGH-QUALITY COVER
The AquaGuard is made from high-quality 580g/m² reinforced PVC fabric with a UV-resistant protective layer. It's available in seven colors to seamlessly blend with your surroundings. Designed to rest on the water's surface, the cover may show some wrinkles depending on the water level. The watertight cover includes a pump to remove excess rainwater.
The AquaGuard is composed of a reinforced PVC membrane, allowing for a near-hermetic seal of the pool. Operated by a key switch, the cover rolls up behind the pool in under a minute, making it quick and easy to open or close the pool. Available in both integrated and above-ground versions, the AquaGuard is suitable for both new and existing pools.
SAFETY
The AquaGuard is a genuine safety cover that complies with the French NF P 90-308 standard. It utilizes a hydraulic mechanism, eliminating the need for electricity near the pool. The cover's near-hermetic seal ensures the safety of children, animals, and even adults. Due to the water's buoyancy, the cover can support several hundred kilograms. Furthermore, the AquaGuard is self-locking, requiring no additional manual effort to secure it.
SYSTEM
The AquaGuard cover's mechanical principle is similar to that of a sailboat. The cover is guided in anodized aluminum tracks by KEVLAR-reinforced polyester ropes, with rope pulleys located at the track ends. To open the cover, the fabric is rolled up onto a tube positioned behind the pool. A hydraulic pump housed in the technical room powers the operation, eliminating the need for electricity near the pool. The cover is controlled by a key switch or a touchscreen with a pool view.
KEEPING THE POOL CLEAN
Beyond safety, the AquaGuard helps maintain a clean pool. Its near-hermetic seal keeps out leaves, pine needles, dust, and other debris. It also blocks UV rays, limiting algae growth and chlorine degradation. This results in crystal-clear pool water and minimizes the need for chemicals.
ENERGY SAVING
The AquaGuard cover helps maintain pool water temperature by minimizing energy loss from evaporation. Even when closed during the day, the pool continues to warm up, potentially gaining up to 3 degrees Celsius. This effect is more pronounced with darker fabric colors. The AquaGuard is also compatible with heat pumps.
HIGH-QUALITY COVER
The AquaGuard is made from high-quality 580g/m² reinforced PVC fabric with a UV-resistant protective layer. It's available in seven colors to seamlessly blend with your surroundings. Designed to rest on the water's surface, the cover may show some wrinkles depending on the water level. The watertight cover includes a pump to remove excess rainwater.
Can't find what you need ?
Tell us what you need, we'll make sure to find an answer to your questions
INNOVATION
ENERGY EFFICIENT
SAFETY
AESTHETIC
UNDER TRACKS
The tracks are placed under the coping stones, offering a discrete and aesthetical integration of your cover.
TOP TRACKS
The tracks are placed on the coping stones of the swimming pool. Their rounded shape will prevent you from hurting yourself.
FLUSH TRACKS
The tracks are placed at the same level as the terrace or coping stones.
An array of colors to chose from
Image slider
Also a solution for spas
SpaFlex is an automatic and insulating cover for integrated spas and swim spas. The SpaFlex cover closes in less than 20 seconds, using a key switch. This cover offers you not only comfort, but also insulation and safety. An AquaGuard with an integrated insulating PE foam offers the perfect insulation. Furthermore this cover closes the spa completely minimizing evaporation and the corresponding heat losses.
.jpg)
The cover is integrated in a small pit behind the spa. De cover pit lid can be chosen as desired (stone, wood, tiles) to ensure a perfect integration. The hydraulic motor drives the cover and the tracks on both sides of the spa guide the fabric ensuring a perfect closure. The insulating cover is made out of 2 layers of reinforced PVC fabric with an integrated insulating PE foam, minimizing evaporation and the corresponding heat losses. Furthermore the spa stays perfectly clean. The watertight cover is delivered with a pool cover pump to evacuate excessive rain water.
INSULATION EFFICIENT
This will keep your water at an enjoyable temperature. The SpaFlex will also prevent the water from evaporating and will keep it clean. A hydraulic motor will activate the cover. The cover can be integrated in a pit or bench finished with the material of your choice. An evacuation pump will drain the excess rain water from the fabric if needed.
Insulation values:
Don’t hesitate to compare:
U-value = 4,76 W/m²K
An array of colours to chose from
Image slider
AQUAGUARD
Uncompromising Pool Safety
Uncompromising Pool Safety
AQUAGUARD - AUTOMATIC SAFETY COVER
PRINCIPLE
The AquaGuard is composed of a reinforced PVC membrane, allowing for a near-hermetic seal of the pool. Operated by a key switch, the cover rolls up behind the pool in under a minute, making it quick and easy to open or close the pool. Available in both integrated and above-ground versions, the AquaGuard is suitable for both new and existing pools.
SAFETY
The AquaGuard is a genuine safety cover that complies with the French NF P 90-308 standard. It utilizes a hydraulic mechanism, eliminating the need for electricity near the pool. The cover's near-hermetic seal ensures the safety of children, animals, and even adults. Due to the water's buoyancy, the cover can support several hundred kilograms. Furthermore, the AquaGuard is self-locking, requiring no additional manual effort to secure it.
SYSTEM
The AquaGuard cover's mechanical principle is similar to that of a sailboat. The cover is guided in anodized aluminum tracks by KEVLAR-reinforced polyester ropes, with rope pulleys located at the track ends. To open the cover, the fabric is rolled up onto a tube positioned behind the pool. A hydraulic pump housed in the technical room powers the operation, eliminating the need for electricity near the pool. The cover is controlled by a key switch or a touchscreen with a pool view.
KEEPING THE POOL CLEAN
Beyond safety, the AquaGuard helps maintain a clean pool. Its near-hermetic seal keeps out leaves, pine needles, dust, and other debris. It also blocks UV rays, limiting algae growth and chlorine degradation. This results in crystal-clear pool water and minimizes the need for chemicals.
ENERGY SAVING
The AquaGuard cover helps maintain pool water temperature by minimizing energy loss from evaporation. Even when closed during the day, the pool continues to warm up, potentially gaining up to 3 degrees Celsius. This effect is more pronounced with darker fabric colors. The AquaGuard is also compatible with heat pumps.
HIGH-QUALITY COVER
The AquaGuard is made from high-quality 580g/m² reinforced PVC fabric with a UV-resistant protective layer. It's available in seven colors to seamlessly blend with your surroundings. Designed to rest on the water's surface, the cover may show some wrinkles depending on the water level. The watertight cover includes a pump to remove excess rainwater.
The AquaGuard is composed of a reinforced PVC membrane, allowing for a near-hermetic seal of the pool. Operated by a key switch, the cover rolls up behind the pool in under a minute, making it quick and easy to open or close the pool. Available in both integrated and above-ground versions, the AquaGuard is suitable for both new and existing pools.
SAFETY
The AquaGuard is a genuine safety cover that complies with the French NF P 90-308 standard. It utilizes a hydraulic mechanism, eliminating the need for electricity near the pool. The cover's near-hermetic seal ensures the safety of children, animals, and even adults. Due to the water's buoyancy, the cover can support several hundred kilograms. Furthermore, the AquaGuard is self-locking, requiring no additional manual effort to secure it.
SYSTEM
The AquaGuard cover's mechanical principle is similar to that of a sailboat. The cover is guided in anodized aluminum tracks by KEVLAR-reinforced polyester ropes, with rope pulleys located at the track ends. To open the cover, the fabric is rolled up onto a tube positioned behind the pool. A hydraulic pump housed in the technical room powers the operation, eliminating the need for electricity near the pool. The cover is controlled by a key switch or a touchscreen with a pool view.
KEEPING THE POOL CLEAN
Beyond safety, the AquaGuard helps maintain a clean pool. Its near-hermetic seal keeps out leaves, pine needles, dust, and other debris. It also blocks UV rays, limiting algae growth and chlorine degradation. This results in crystal-clear pool water and minimizes the need for chemicals.
ENERGY SAVING
The AquaGuard cover helps maintain pool water temperature by minimizing energy loss from evaporation. Even when closed during the day, the pool continues to warm up, potentially gaining up to 3 degrees Celsius. This effect is more pronounced with darker fabric colors. The AquaGuard is also compatible with heat pumps.
HIGH-QUALITY COVER
The AquaGuard is made from high-quality 580g/m² reinforced PVC fabric with a UV-resistant protective layer. It's available in seven colors to seamlessly blend with your surroundings. Designed to rest on the water's surface, the cover may show some wrinkles depending on the water level. The watertight cover includes a pump to remove excess rainwater.
Can't find what you need ?
Tell us what you need, we'll make sure to find an answer to your questions
INNOVATION
ENERGY EFFICIENT
SAFETY
AESTHETIC
UNDER TRACKS
The tracks are placed under the coping stones, offering a discrete and aesthetical integration of your cover.
TOP TRACKS
The tracks are placed on the coping stones of the swimming pool. Their rounded shape will prevent you from hurting yourself.
FLUSH TRACKS
The tracks are placed at the same level as the terrace or coping stones.
An array of colors to chose from
Image slider
Also a solution for spas
SpaFlex is an automatic and insulating cover for integrated spas and swim spas. The SpaFlex cover closes in less than 20 seconds, using a key switch. This cover offers you not only comfort, but also insulation and safety. An AquaGuard with an integrated insulating PE foam offers the perfect insulation. Furthermore this cover closes the spa completely minimizing evaporation and the corresponding heat losses.
The cover is integrated in a small pit behind the spa. De cover pit lid can be chosen as desired (stone, wood, tiles) to ensure a perfect integration. The hydraulic motor drives the cover and the tracks on both sides of the spa guide the fabric ensuring a perfect closure. The insulating cover is made out of 2 layers of reinforced PVC fabric with an integrated insulating PE foam, minimizing evaporation and the corresponding heat losses. Furthermore the spa stays perfectly clean. The watertight cover is delivered with a pool cover pump to evacuate excessive rain water.
INSULATION EFFICIENT
This will keep your water at an enjoyable temperature. The SpaFlex will also prevent the water from evaporating and will keep it clean. A hydraulic motor will activate the cover. The cover can be integrated in a pit or bench finished with the material of your choice. An evacuation pump will drain the excess rain water from the fabric if needed.
Insulation values:
Don’t hesitate to compare:
U-value = 4,76 W/m²K
An array of colours to chose from
Image slider