OUR INTEGRATED VERSIONS

T&A has become an expert in integrating swimming pool covers. We offer standard as well as tailor-made solutions. Up to 12m wide, 50m long, 3,8m deep, our possibilities are almost limitless. To achieve the best possible result, we offer several finishing options such as stone, acrylic stone, PVC, fiberglass, wood, …


Underwater mount in pit	Underwater mount in pit with high water level	Underwater mount in stairs or shallow water zone	Underwater mount in bottom	Underwater mount in wall	Underwater mount on bottom

UNDERWATER MOUNT IN PIT - Classic line

The cover pit behind the pool is a well-known classic. Between pool and pit there’s a brick or concrete wall or a tailor-made panel out of PVC or fiberglass. We recommend to install a main drain in the cover pit and the water level of the pool should be monitored at all times. A stainless steel or aluminum beam in combination with a wooden deck cover the pit. The water level is about 10-12cm lower than the coping, depending on the type of beam. For lager pools the beam needs extra supports to limit its deflection.

UNDERWATER MOUNT IN PIT WITH HIGH WATER LEVEL

This version is especially interesting if you want to have a very high water level. Often this water level is reached using special skimmers or an overflow channel on 1 side of the pool. Depending on the thickness of the coping stone, a very high water level can be reached. Instead of using a beam, high water level brackets with a length of 77, 95 or 120cm are installed to carry the wooden gratings. The brackets can even be used to carry a cover pit lid out of stone.

UNDERWATER MOUNT IN STAIRS OR SHALLOW WATER ZONE - beach line

This version is very stylish and can be applied in new pools or pool renovations. The pool cover is integrated in the first step of the stairs or shallow water zone. T&A offers a wide range of finishing possibilities such as acrylic stone, PVC plates with pool liner or tiles. In combination with a stainless steel beam including guiding brackets, the pool cover is almost invisibly integrated. Our drives with soft-start function are extremely suitable. This version can be applied to skimmer and overflow pools.

UNDERWATER MOUNT IN BOTTOM - exclusive line

The slats are rolled up in a cover pit in the bottom of the pool. This space-saving type of installation is discrete, aesthetical and ideal for indoor pools. The cover pit can be finished using natural stone, ceramic tiles, PVC plates with liner or mosaic. As the roller shaft and motor are sitting deeper, a more powerful drive is needed.

UNDERWATER MOUNT IN THE WALL - Elegant line

This version is extremely suitable for overflow pools. The cover is integrated in a space inside the pool wall. Between pool and pit there’s a panel out of PVC or fiberglass. Above the wall there’s a space to make the cover go through. At the pool floor there’s an opening to improve the water circulation inside the cover pit.

UNDERWATER MOUNT ON BOTTOM

This version is a good solution for existing pools. The pool cover mechanism can be covered with a bench. This bench is available in several colors or as a version to be tiled.